Hydraulic station and hydraulic pump, hydraulic device independent. Itrequested by host feeding, and control the oil flow direction, pressure and flow rate, it is suitable for various hydraulic machinery in the hostand the hydraulic loading can be separated. Users to buy as long as the actuator pressure station and the host (cylinder or motor oil)connected with tubing, hydraulic machinery can realize various requirements of movement, the work cycle.
Hydraulic pump station is installed, manifold or valve combination, oil tank, an electrical box assembly. Each component functions as follows: pump device -- is equipped with motors and pumps, it is the power source of the hydraulic station, the mechanical energy into hydraulic oil pressure can be. Integrated block is composed ofhydraulic valve body and channel assembled. It to the hydraulic oil implement direction, pressure, flow control. Valve - plate valve is installed in the vertical plate, plate pipe connection, and the integrated block function with.
The oil box - board welding semi-enclosed container is arranged on the oil filter, air filter, cooling and filtering it used oil, oil. Electrical box,there are two types of. Fuse terminal plate a set; a is the configuration of the full range of electrical control.
The working principle of hydraulic station: motor drive pump rotation,the pump from the tank of oil in oil, the mechanical energy into hydraulic oil pressure can be, hydraulic oil through the integratedblock (or valve combination) is hydraulic valve realized the direction,pressure, flow control by external line transmission to the cylinder or an oil motor hydraulic machinery, so as to control the direction of the motive fluid transformation, the size of the strength and speed,promote all kinds of hydraulic machinery.
The main technical parameters of the equipment
1, the system pressure: 1-31.5MPa;
2, the system flow: 10-120L/Min
3, the motor voltage: AC380V
4, the electromagnetic voltage: AC220/AC110V/DC24
5, fuel tank capacity: 40L 60L 80L choose one
Two, main equipment parts list
Name type remarks quantity
1, hydraulic motor 1
2, oil pump gear pump plunger pump 08/15/20/30 / 1 choose one
3, solenoid valve
5, 40L 60L80L 100L 120L1 standard tank
6, the integrated circuit block
7, the oil filter
8, air filter
9, liquid level and temperature meter
10, other accessories connector hose pipes etc..
Four, the system use matters needing attention
1, recommend the use of N32 or N46 anti-wear hydraulic oil, workshould always pay attention to oil temperature, oil tank oil temperatureshould not exceed 60C, the oil temperature is the most suitable for the 30C ^ 55C, when the temperature is lower than 15C or greater than 60C should be given to the heating or cooling.
2, the hydraulic oil generally use 1- June should be replaced once,and tank cleaning, remove dirt and dust. For about three monthsshould be cleaning the tank to replace the new oil using new hydraulic equipment in use. Filter should be cleaned in the cleaning tank, filteroil filter should be replaced regularly and cleaning. Recommend the use of Gobierno oil to save costs.
3, external electric control line introduced by the electrical box, please pay special attention to the motor and pump should be consistent tothe arrow marked direction, control voltage solenoid valve must be consistent with the electromagnet.
4, pump and motor start: first check the hand wheel adjustmentsystem before the start, the handle is normal. Electrical switch and a travel stop position is firm, then you can first no-load start, then the load of work to short run. Under normal circumstances, work processnot frequent opening and closing machine. In the low-temperature start, need to adjust the relief valve rated pressure 1/2, again to move the motor, so that the overflow valve full overflow, warming to the hydraulic oil, the temperature rises to about 20C, and then put into use. (the heater can be directly heated).
5, equipment shall be rated pressure following work, otherwise easily lead to motor overheating and even overload and damage to othercomponents